03-09-2016, 08:03 PM
So the Level HL doesn't really matter, it's not about that - rather it's just about turning the COV triangle 90 degrees. What you've done is basically correct except that the COV cannot cross over the actual Horizon line for this method to work - that's when your objects start getting distortions like the large rectangle you have there. The method which you used the measuring points for the inclined cube is also correct, the method I have deals with a VP3 on the VL.
But in my example, all I did was swing SPa 90 degrees.
![[Image: k5EVhAi.png]](http://i.imgur.com/k5EVhAi.png)
But in my example, all I did was swing SPa 90 degrees.